Title: How to Install OSX86 ISO HAZARD on Your PC
If you want to run Mac OS X on your PC, you might have heard of OSX86 ISO HAZARD, a custom distribution of Snow Leopard that supports most of the modern hardware for Intel and AMD processors. In this article, we will show you how to download and install OSX86 ISO HAZARD on your PC using a DVD or a USB drive.
OSX86 ISO HAZARDtorrent
What You Need
A PC with an Intel or AMD processor that supports SSE2 and SSE3 instructions.
A DVD burner or a 8GB USB drive.
A blank DVD or a USB drive formatted as FAT32.
OSX86 ISO HAZARD torrent file, which you can download from here.
A torrent client, such as uTorrent or BitTorrent.
A tool to burn the ISO file to a DVD or a USB drive, such as ImgBurn or TransMac.
A backup of your important data, as installing OSX86 ISO HAZARD will erase your hard drive.
Step 1: Download and Burn the ISO File
Open your torrent client and load the OSX86 ISO HAZARD torrent file. Wait for the download to finish, then locate the ISO file on your computer. If you want to use a DVD, insert a blank DVD into your DVD burner and use ImgBurn or another tool to burn the ISO file to the DVD. If you want to use a USB drive, plug in your USB drive and use TransMac or another tool to restore the ISO file to the USB drive.
Step 2: Boot from the DVD or USB Drive
Restart your PC and enter the BIOS setup by pressing the appropriate key (usually F2, F10, F12, or Del). Change the boot order so that your DVD or USB drive is the first option. Save and exit the BIOS setup. Your PC should boot from the DVD or USB drive and load the OSX86 ISO HAZARD installer.
Step 3: Install OSX86 ISO HAZARD
At the bootloader menu, you can type some commands to customize your installation. For example, if you have an AMD processor, you can type -v -x -f cpus=1 busratio=20 arch=i386 to boot in verbose mode, safe mode, force loading extensions, limit CPU cores, set bus ratio, and force 32-bit mode. You can also type -v arch=i386 if you want to boot in 32-bit mode by default. Press Enter to continue.
The installer will load and ask you to choose a language. Choose your preferred language and click Next. At the top menu bar, click Utilities and select Disk Utility. Select your hard drive from the left panel and click Erase. Choose Mac OS Extended (Journaled) as the format and give it a name. Click Erase and confirm. Close Disk Utility and return to the installer.
Click Continue and agree to the license agreement. Select your hard drive as the destination and click Customize. Here you can choose which options to install according to your hardware configuration. For example, if you have an Intel Atom processor, you can choose Intel Atom Kernel 10.2.0; if you have an ATI HD 2600 graphics card, you can choose ATI HD 2600 Fix; if you have an ALC889a audio chip, you can choose ALC889a Voodoo 0.2.52 new; etc. You can also choose which bootloader, tools, software, fonts, etc. to install. Make sure you select Fakesmc 1.0 under System Support to avoid kernel panic errors.
Click OK and then Install. Wait for the installation to finish, then click Restart.
Step 4: Enjoy Mac OS X on Your PC
Your PC should boot into Mac OS X Snow Leopard with OSX86 ISO HAZARD 29c81ba772